Epoxy glue (BAND E-B205)
2
People watching this product now!
A solvent-free two-component adhesive based on epoxy resins and a special hardener, which enables the connection of new concrete by applying a layer on the old concrete.
محصولات پیشنهادی
Concrete glue (BAND – B201)
Concrete adhesive is an emulsion polymer that is used to increase the adhesion of new concrete in order to adhere to old concrete in various cases, including the repair of concrete structures.
Application:
Concrete glue is used to increase the adhesion of concrete in the following cases:
1- Repairing and repairing surface and deep damages of concrete structures that are dry or in contact with moisture.
2- Increasing the bending strength of concrete
3- facade construction on old concrete
4- Preventing dust and dirt
Paste tile adhesive (BAND T-B206)
This adhesive is designed on the basis of modified polymer resins, which, in addition to its remarkable adhesion, sticks to all kinds of materials.
Properties and effects:
High adhesion to all kinds of materials
High and homogeneous flexibility
High elasticity
After drying, it is completely resistant and impervious to water and humidity, and it has stable quality.
It does not take much time and it is possible to move the tile within minutes after installation.
Its life is equal to the life of the structure.
Polyurethane adhesive (Band PO-B204)
Adhesive based on polyurethane resin with high flexibility and non-permeability fills the seams of concrete structures. These seams include executive and non-executive seams.
Application:
Sealing of water supply channels, pipes, drinking water tanks, water and sewage treatment plants, as well as expansion joints and joints is one of the most important uses of this material.
Powder tile adhesive (BAND TP-B207)
This type of glue is designed and produced on the basis of cement, which, due to the many polymers used in its construction, will be completely impermeable to water after mixing with water and drying.
Properties and effects:
1- High adhesive strength
2- Impermeable to water
3- resistant to dampness
4- property of controlled flexibility.
5- It has quality from -15 to +75 degrees Celsius.
6- Ease and speed of execution
Special tile adhesive (BAND TS-B208)
This adhesive, which is produced by mixing cement and resin adhesives, has a significant adhesive strength to all kinds of surfaces and is used for gluing all kinds of materials, including ceramic tiles, on floors and walls. After drying, BAND TS cannot be immersed in water It will not dissolve and remains completely impenetrable.
Super concrete glue (BAND-B202)
Concrete adhesive is an acrylic-based emulsion polymer that is used to increase the adhesion of new concrete in order to adhere to old concrete in various cases, including the repair of concrete structures.
Application:
Concrete glue is used to increase the adhesion of concrete in the following cases:
1- Repairing and repairing surface and deep damages of concrete structures that are dry or in contact with moisture.
2- Preventing moisture
3- facade construction on old concrete
4- Increasing the very high strength of concrete up to 3 times of normal concrete and repairing waterways and cement pipe water channels.
آب بند پلیمری-B-259
نوعی لایه پوششی آب بند و محافظت کننده دو جزئی بر پایه سیمان و رزین اکریلیکی می باشد. قدرت ارتجاعی، دوام طولانی و چسبندگی بسیار زیاد به بتن و لوله های فلزی و سایر مصالح از خواص این ماده است.
با استاندارد های زیر مطابقت دارد.
ASTM C140-05- M E96-ASTM C964060 ASTM D-836 C
خواص و اثرات:
- سمی نیست
- قابلیت چسبندگی بسیار زیاد به سطح
- محافظت سطوح در برابر کربناته شدن و نفوذ یون کلر
- توانایی ازدیاد طول و انعطاف پذیری
- استحکام زیاد در برابر یخ زدگی
- مقاوم در برابر نمک ها
- استحکام بسیار عالی در برابر مواد اسیدی و قلیایی
- سهولت اجرا
- رفع نفوذپذیری مقاطع مورد کاربرد
- عدم جلوگیری از تنفس بتن
- غیر قابل اشتغال
- ضد جلبک و خزه
آب بند کننده پوششی
آب بند کننده پوششی یکی از مواد آب بند به صورت مایع تک جزئی با بنیان شیمیایی اکریلیک، بدون حلال با پایه آبی و دارای قدرت چسبندگی بالا به انواع مصالح ساختمانی می باشد.
موارد کاربرد:
از آنجا که غشای کاملا چسبنده ای که این ماده در زیرکار ایجاد می کند 100 درصد آب بند می باشد در مواردی نظیر پوشش ورقه های آزبستی، غشای واترپروف ایجاد شده تضمینی برای تمامی سطوح مانند سقف، شیروانی،جداول خیابانی، پشت بام، بالکن ها و مناطقی کا دارای بار ترافیکی هستند می باشد. همچنین برای تمامی سطوح زیر کار اعم از بتنی، چوبی، فلزی، قطعات بتنی حاوی الیاف و بیتومن کاربرد دارد.
آنی گیر فشار منفی
CONPLUG نوعی ماده آب بند کننده فوری بر پایه سیمان می باشد که پس از مخلوط شدن با آب خمیری قدرتمند برای انسداد آنی نشت های پرفشار می سازد.با استاندارد ASTMC 05-928 مطابقت دارد.
خواص و اثرات:
1- فاقد یون کلر
2- سهولت اختلاط با آب
3- پایدار و دائمی
4- چسبندگی عالی به انواع مصالح مخصوصاٌ بتن سنگ و آجر
5- بدون انقباض و ترک خوردگی
6- گیرش سریع
7- حفظ کیفیت به عمر سازه مورد کاربرد.
Indications:
• Strong adhesive for connecting concrete to old concrete.
• Covering concrete surfaces against permanent moisture
• Repair and reconstruction of metal molds.
• As a strong adhesive for connecting most building materials such as concrete, metal, stone, ceramic and wood.
Special properties:
• It has good resistance to moisture.
• Creates adhesion on wet surfaces.
• It has high mechanical resistance.
• It has high coating resistance.
• It can be consumed overnight.
How to use:
The work surface must be clean and free of any dust and grease. Polished surfaces should be roughened and scratched.
This glue consists of two components A and B. At the time of use, you must mix A and B components before mixing them separately so that the ingredients are uniform. After that, take the desired amount from the two components in the determined ratio and mix them together in a separate container and mix for 2 to 3 minutes and make sure that all the ingredients in the container are mixed together. (It is better to use an electric mixer with a low speed.) Apply the prepared glue with a brush and a roller to the desired surface that you have already prepared, so that the material touches the surface below, then apply the new concrete on Run it.
Apply it well so that the material is applied to the surface below, then apply the new concrete on it.
To cover and connect the two surfaces, prepare the glue from above.
Clean tools and equipment with special epoxy thinner.
Specifications:
Color: Gray / Specific weight: 1.5 kg per liter
Mixing ratio of two components:
Volumetrically: B + A = 2+1
By weight: B + A = 2+1
Mixing time: 2 to 3 minutes
Pot life after mixing: 2 minutes at 25°C
Surface drying time: 8 to 12 hours
Final drying time: 7 days
Shelf life before mixing: 12 months
Ambient temperature during use: above 10 degrees Celsius
Storage conditions: dry environment above zero degree
Compressive strength: 75N/mm
Adhesion strength to concrete: 4N/mm
Adhesion strength to steel: 20N/mm
The above values are at 25°C after 10 days.
Desired points:
It is necessary to strictly observe the determined ratio for mixing components A and B. It should be ensured that both components are completely mixed and uniform for 3 minutes on all surfaces of the containers. Gloves and masks should be used when using.
Reviews
Clear filtersThere are no reviews yet.