Polyurethane adhesive (Band PO-B204)
4
People watching this product now!
Adhesive based on polyurethane resin with high flexibility and non-permeability fills the seams of concrete structures. These seams include executive and non-executive seams.
Application:
Sealing of water supply channels, pipes, drinking water tanks, water and sewage treatment plants, as well as expansion joints and joints is one of the most important uses of this material.
محصولات پیشنهادی
Concrete glue (BAND – B201)
Concrete adhesive is an emulsion polymer that is used to increase the adhesion of new concrete in order to adhere to old concrete in various cases, including the repair of concrete structures.
Application:
Concrete glue is used to increase the adhesion of concrete in the following cases:
1- Repairing and repairing surface and deep damages of concrete structures that are dry or in contact with moisture.
2- Increasing the bending strength of concrete
3- facade construction on old concrete
4- Preventing dust and dirt
Paste tile adhesive (BAND T-B206)
This adhesive is designed on the basis of modified polymer resins, which, in addition to its remarkable adhesion, sticks to all kinds of materials.
Properties and effects:
High adhesion to all kinds of materials
High and homogeneous flexibility
High elasticity
After drying, it is completely resistant and impervious to water and humidity, and it has stable quality.
It does not take much time and it is possible to move the tile within minutes after installation.
Its life is equal to the life of the structure.
Polyurethane adhesive (Band PO-B204)
Adhesive based on polyurethane resin with high flexibility and non-permeability fills the seams of concrete structures. These seams include executive and non-executive seams.
Application:
Sealing of water supply channels, pipes, drinking water tanks, water and sewage treatment plants, as well as expansion joints and joints is one of the most important uses of this material.
Powder tile adhesive (BAND TP-B207)
This type of glue is designed and produced on the basis of cement, which, due to the many polymers used in its construction, will be completely impermeable to water after mixing with water and drying.
Properties and effects:
1- High adhesive strength
2- Impermeable to water
3- resistant to dampness
4- property of controlled flexibility.
5- It has quality from -15 to +75 degrees Celsius.
6- Ease and speed of execution
Special tile adhesive (BAND TS-B208)
This adhesive, which is produced by mixing cement and resin adhesives, has a significant adhesive strength to all kinds of surfaces and is used for gluing all kinds of materials, including ceramic tiles, on floors and walls. After drying, BAND TS cannot be immersed in water It will not dissolve and remains completely impenetrable.
Super concrete glue (BAND-B202)
Concrete adhesive is an acrylic-based emulsion polymer that is used to increase the adhesion of new concrete in order to adhere to old concrete in various cases, including the repair of concrete structures.
Application:
Concrete glue is used to increase the adhesion of concrete in the following cases:
1- Repairing and repairing surface and deep damages of concrete structures that are dry or in contact with moisture.
2- Preventing moisture
3- facade construction on old concrete
4- Increasing the very high strength of concrete up to 3 times of normal concrete and repairing waterways and cement pipe water channels.
آب بند پلیمری-B-259
نوعی لایه پوششی آب بند و محافظت کننده دو جزئی بر پایه سیمان و رزین اکریلیکی می باشد. قدرت ارتجاعی، دوام طولانی و چسبندگی بسیار زیاد به بتن و لوله های فلزی و سایر مصالح از خواص این ماده است.
با استاندارد های زیر مطابقت دارد.
ASTM C140-05- M E96-ASTM C964060 ASTM D-836 C
خواص و اثرات:
- سمی نیست
- قابلیت چسبندگی بسیار زیاد به سطح
- محافظت سطوح در برابر کربناته شدن و نفوذ یون کلر
- توانایی ازدیاد طول و انعطاف پذیری
- استحکام زیاد در برابر یخ زدگی
- مقاوم در برابر نمک ها
- استحکام بسیار عالی در برابر مواد اسیدی و قلیایی
- سهولت اجرا
- رفع نفوذپذیری مقاطع مورد کاربرد
- عدم جلوگیری از تنفس بتن
- غیر قابل اشتغال
- ضد جلبک و خزه
آب بند کننده پوششی
آب بند کننده پوششی یکی از مواد آب بند به صورت مایع تک جزئی با بنیان شیمیایی اکریلیک، بدون حلال با پایه آبی و دارای قدرت چسبندگی بالا به انواع مصالح ساختمانی می باشد.
موارد کاربرد:
از آنجا که غشای کاملا چسبنده ای که این ماده در زیرکار ایجاد می کند 100 درصد آب بند می باشد در مواردی نظیر پوشش ورقه های آزبستی، غشای واترپروف ایجاد شده تضمینی برای تمامی سطوح مانند سقف، شیروانی،جداول خیابانی، پشت بام، بالکن ها و مناطقی کا دارای بار ترافیکی هستند می باشد. همچنین برای تمامی سطوح زیر کار اعم از بتنی، چوبی، فلزی، قطعات بتنی حاوی الیاف و بیتومن کاربرد دارد.
آنی گیر فشار منفی
CONPLUG نوعی ماده آب بند کننده فوری بر پایه سیمان می باشد که پس از مخلوط شدن با آب خمیری قدرتمند برای انسداد آنی نشت های پرفشار می سازد.با استاندارد ASTMC 05-928 مطابقت دارد.
خواص و اثرات:
1- فاقد یون کلر
2- سهولت اختلاط با آب
3- پایدار و دائمی
4- چسبندگی عالی به انواع مصالح مخصوصاٌ بتن سنگ و آجر
5- بدون انقباض و ترک خوردگی
6- گیرش سریع
7- حفظ کیفیت به عمر سازه مورد کاربرد.
Features and Effects:
1- Resistant to harmful environmental factors and sunlight.
2- Excellent adhesion to all kinds of building materials.
3- High flexibility in extreme cold and heat.
4- Absence of contraction and swelling.
5- Durability and high erosion strength.
Consumption:
According to the volume of surfaces and seams and the specific weight of the sealant, the consumption amount can be calculated.
Method of Use:
First, the desired surface must be completely cleaned so that it is free of any dust and grease. Then, single-component sealant and surfaces are applied inside the seams with an injection tool. Finally, to obtain a smooth and polished surface, the surface can be polished using a spatula.
Storage conditions and duration:
Keep it away from frost and direct sunlight and at a temperature of 0 to 30 degrees Celsius for one year in the original packaging.
packing:
Cartridges weighing approximately 700 grams.
Attention:
1- The adhesive complies with ASTM C 412, ASTM C 510, ASTM C 719, and ASTM C920 standards.
2- The percentage increase in the length of the sealant is 950%.
3- The specific weight of the sealant is 1200 kg/m3.
4- The initial drying time is 25 minutes and the amount of drying in one day is about 55 mm.
Reviews
Clear filtersThere are no reviews yet.