Powder tile adhesive (BAND TP-B207)

Application:

1- Installing all kinds of tiles, stones, ceramics and mosaics on all kinds of floor surfaces.
2- Possibility of use on surfaces that are in direct contact with water.
3- The possibility of installing coatings on concrete, stone, plaster, etc.

Consumption:

Depending on the type of surface to be worked on, the level of unevenness, its porosity, and the shape of the grooves on the back of the tile, about 1.5 to 2.5 kg of powdered tile adhesive is needed to cover one square meter.

Method of Use:

First, the work surface must be free of any grease, dust, loose particles or old paint. Then, three volumes of powder are mixed with one volume of water and we continue the mixing process until a uniform and homogeneous paste is obtained, and finally, the prepared tile adhesive paste is spread on the surface with a grooved spatula and the tile is placed on it. to give

Physical and chemical characteristics:

Color: Gray
Physical state: powder
Ion Keller: No
Solubility: Water
Specific weight: 1/25 gr/〖cm〗^3
packing:
25 kg bags

Attention:

Be careful that at least 60% of the back of the tile should be covered with glue. Otherwise, the depth of the spatula grooves should be increased. After mixing the powder tile adhesive with water, use the prepared product for less than 30 minutes. Otherwise, the glue will not have enough ability to keep the material on the applied surfaces.