Special tile adhesive (BAND TS-B208)

14 People watching this product now!
Category:

This adhesive, which is produced by mixing cement and resin adhesives, has a significant adhesive strength to all kinds of surfaces and is used for gluing all kinds of materials, including ceramic tiles, on floors and walls. After drying, BAND TS cannot be immersed in water It will not dissolve and remains completely impenetrable.

قیمت محصول:​

Consumption:

Depending on the type of surface to be worked on, the degree of unevenness, the porosity of the surfaces, as well as the grooves behind the tile, about 1.5 to 2.5 kg of special tile adhesive is needed to cover one square meter.

Method of Use:

First, the work surface must be free of any grease, dust, loose particles or old paint. Then we slowly add three volumes of powder with one volume of water and mix using a mixer and continue the mixing until a uniform and homogeneous paste is obtained. The execution is stretched and we put the tile on it with pressure.

Maintenance:

away from moisture.

Physical and chemical characteristics:

Color: Gray
Physical state: powder
Ion Keller: No
Solubility: Water
Specific weight: 1.5 gr/〖cm〗^3

packing:

25 kg bags

Attention:

Be careful that at least 60% of the back of the tile should be covered with glue. Otherwise, the depth of the spatula grooves should be increased. After mixing the special tile adhesive with water, use the prepared product for less than 30 minutes. Otherwise, the glue will not have enough ability to keep the material on the applied surfaces.

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Special tile adhesive (BAND TS-B208)”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

محصولات پیشنهادی